Shenzhen maitengfei Automation Technology Co., Ltd
Specializing in the R & D, production and sales of automation equipment
National hotline：8617818343707
Product classification
Ultrasonic series
Computer desktop cutting machine cold cutting series
Computer integrated cutting machine cold cutting series
Computer large-scale cutting machine cold cutting series
Computer eagerly cutting machine
Computer cold and hot dual-purpose cutting machine
Hot-cutting cold and hot dual-purpose plus punching and cutting machine
Computer eagerly cutting round corner shaped tape cutting machine
Computer eager electronic eye tracking tape cutting machine
Computer eagerly cutting high-speed labeling machine
Desktop heat sealing bag making machine series
Large heat sealing bag making machine series
Ultrasonic non-woven fabric heat sealing bag making machine
PE vest plastic shopping bag heat sealing bag making machine
Automatic shaped rolling machine
Glove machine series
Sealing machine series
Wire Harness Series
Mask machine series
Laser cutting machine series
Paper straw machine series
Automatic packaging machine
Automatic slitting and winding machine
News Center
Contact us
Shenzhen Maitengfei Technology Co., Ltd
Contacts：Emily Hsu
Phone：8617818343707
Telephone：8617818343707
Address：Building C, youth dream workshop, dalanglangkou, Longhua District, Shenzhen
1. The spindle speed change must be carried out after stopping. The gears must be fully meshed when shifting. When the machine tool is found to be abnormal, stop and check immediately.
2. Before cutting, adjust the cutter and clamp the workpiece. The length of the clamping part shall not be less than 50 mm. The parking baffle should be fixed, and it can be operated only after the sequence of clamping, unclamping, forward and backward testing.
3. When the machine tool is rotating, no part of the human body shall touch the transmission parts. When operating, tie up the cuffs and strictly prohibit working with gloves. The human head should deviate from the cutting direction.
4. When changing tools, measuring workpieces, lubricating, and cleaning pipe heads, the machine must be stopped.
5. When cutting the tube head, prevent the tube head from flying out and hurting people.
6. When the long material pipe is put into the material rack and the bundled lead wire is loosened, measures should be taken to prevent the pipe from rolling, impacting, and crushing people.
7. When using the grinding wheel pipe cutting machine, check whether the grinding wheel is damaged, cracked, damp, and the power cord is reliable.
8. The dust removal device of the automatic pipe cutting machine should be intact before cutting.
9. No one should stand in the direction of the workpiece in and out of the material.
Telephone：8617818343707 EMAIL：2016971905@qq.com
Company address：Building C, youth dream workshop, dalanglangkou, Longhua District, Shenzhen
copyright：Shenzhen Maitengfei Technology Co., Ltd Yue ICP Bei No. 123456
Scan wechat
telephone