Shenzhen maitengfei Automation Technology Co., Ltd
Specializing in the R & D, production and sales of automation equipment
National hotline：8617818343707
Product classification
Ultrasonic series
Computer desktop cutting machine cold cutting series
Computer integrated cutting machine cold cutting series
Computer large-scale cutting machine cold cutting series
Computer eagerly cutting machine
Computer cold and hot dual-purpose cutting machine
Hot-cutting cold and hot dual-purpose plus punching and cutting machine
Computer eagerly cutting round corner shaped tape cutting machine
Computer eager electronic eye tracking tape cutting machine
Computer eagerly cutting high-speed labeling machine
Desktop heat sealing bag making machine series
Large heat sealing bag making machine series
Ultrasonic non-woven fabric heat sealing bag making machine
PE vest plastic shopping bag heat sealing bag making machine
Automatic shaped rolling machine
Glove machine series
Sealing machine series
Wire Harness Series
Mask machine series
Laser cutting machine series
Paper straw machine series
Automatic packaging machine
Automatic slitting and winding machine
News Center
Contact us
Shenzhen Maitengfei Technology Co., Ltd
Contacts：Emily Hsu
Phone：8617818343707
Telephone：8617818343707
Address：Building C, youth dream workshop, dalanglangkou, Longhua District, Shenzhen
When using high-speed hacksaw blades to cut various materials, when the cutting effect cannot meet the requirements, we need to pay attention to the following issues:
1. Material: In some cases, the problem lies in the material being cut. Due to the uneven quality of the materials purchased on the market, some contain too many impurities, so when the saw blade cuts these impurities, the hardness is higher. The saw blade may make abnormal noises or even break, and the cut surface may be uneven. The saw blade with low hardness will not break, but it will be skewed after cutting. This is because the saw blade turns and misaligns when it comes into contact with impurities.
2. Saw blade: The saw blade is not properly handled during the grinding and tension adjustment process, the saw teeth are not sharp enough, the yaw degree is poor, the saw blade diameter and the number of teeth are not properly selected, and the saw blade material is poor.
3. Cutting equipment: the horizontal state of the equipment or the processed material is not adjusted properly, the clamping state of the clamp and the processed material is poor, the saw blade is installed incorrectly, the equipment speed is incorrect, the cutting speed is incorrect, the cooling and lubricating medium is incorrectly selected .
4. Operator: For manual equipment, sometimes the operator moves the knife too hard or the knife speed is too fast, which may also cause poor cutting results or chipping of the saw blade.
Telephone：8617818343707 EMAIL：2016971905@qq.com
Company address：Building C, youth dream workshop, dalanglangkou, Longhua District, Shenzhen
copyright：Shenzhen Maitengfei Technology Co., Ltd Yue ICP Bei No. 123456
Scan wechat
telephone
